HDMI Compliance Test Software(1.3) (DTG Distribution)

Product:  TDSHT3v1-3 (DTG Distribution)
Version:  3.3.2 
Date   :  27th December 2007

================================================================================

What is in this file:

1. System Requirements
2. Installation 
3. Contact Tektronix

================================================================================

1. System Requirements
  - The HDMI Compliance Test Software(1.3) is compatible with the following 
    instruments:

	 Product      Firmware-Version 	
	==========   ==================
	 DTG5274           1.0.14	
         DTG5334	   2.0.4

  - Disk space requirements:
    585Mb of free disk space to install and operate this application.

================================================================================

2. Installing DTG Patterns

  The Sink and Cable tests require DTG Patterns on the DTG at -
  C:\TekApplications\TDSHT3v-3 sub-folder.  Install the DTG Pattern 
  files on the Data Timing Generator (DTG 5274/DTG 5334).
  
  If the DTG Pattern files are not installed on the DTG hard disk, perform the 
  following steps to install it from the Optional Applications Software on a 
  Windows-Based Oscilloscope Compact disc (CD-ROM):

  i. If the keyboard is not installed, connect it to the oscilloscope rear panel
     (the optional-accessory keyboard plugs into the USB connector).

  ii. Power on the DTG to start Windows.

  iii. Install the optional applications software CD in the CD-ROM reader 
       of the DTG.

  iv. The autorun utility will start the installation program.  If the autorun 
      utility doesn't start up automatically, browse to the CDROM and 
      double-click the launch.exe.

  v. Click 'HDMI Compliance Test(1.3)'.

  vi. Click 'DTG INSTALL'. This will install the DTG Pattern files at - 
      C:\TekApplications\TDSHT3v1-3  sub-folder on the DTG.        

  Or if you have downloaded the DTG patterns installables from the Web, then 
  double-click TDSHT3v1-3_DTG_Distribution.exe to get the pattern files installed 
  at - C:\TekApplications\TDSHT3v1-3  sub-folder on the DTG.

================================================================================



3. Contact Tektronix
 
For any assistance or feedback on the TDSHT3v1-3, please send an email to: 
- HDMIfeedback@tek.com or
- techsupport@tektronix.com 

---End of File---