External IF Input, B: (Option xxx only)
This SMB(f) connector accepts an IF input at 1.0467MHz, from an external test set. This signal provides the input for Receiver B's measurement data.
-
Max. input: 0 dBm (<0.5 dB compression)
- Damage level: +20 dBm
- Input impedance: 50 ohms, nominal
External IF Input, R2: (Option xxx only)
This SMB(f) connector accepts an IF input (nominally 1.0467MHz) from an external test set. This signal provides both the reference and phase-lock signal for measurements. The phase-lock function requires a signal level above -35dBm.
-
Frequency range: 300 kHz - 10 MHz
- Power range: -35 dBm to 0 dBm
- Input impedance: 50 ohms, nominal
External IF Input, R1: (Option xxx only)
This SMB(f) connector accepts an IF input (nominally 1.0467 MHz) from an external test set. This signal provides both the reference and phase-lock signal for measurements. The phase-lock function requires a signal level above -35 dBm.
-
Frequency range: 300 kHz - 10 MHz
- Power range: -35 dBm to 0 dBm
- Input impedance: 50 ohms, nominal
EXTERNAL IF INPUT, A: (Option xxx only)
This SMB(f) connector accepts an IF input at 1.0467 MHz from an external test set. This signal provides the input for Receiver A's measurement data.