This subsystem controls the sensitivity correction of the external power meter which is used for a source power calibration.
Selects the frequency range for the sensitivity correction of the power meter.
|
<Ch> |
Calibrated channel number
|
|
<boolean> |
ON – from power meter entry in Port Configuration OFF – from source to be calibrated
|
|
*RST value |
ON
|
|
SCPI, Command Types |
Device-specific, command or query
|
|
Example: |
*RST; SENS1:PMMO? Query the default frequency range in channel 1. The response is 1.
|
