*************************************************************
Agilent IntuiLink VNA
Software for Agilent Vector Network Analyzers 
Version 1.1
README.TXT file (Version 1.1)
Copyright (c) Agilent Technologies 2001
*************************************************************

Agilent IntuiLink VNA offers the following capabilities:

- Capture Vector Network Analyzer trace data and screen images in Microsoft
  Excel(R) and Microsoft Word(R) with a mouse click.

- Save and restore network analyzer settings and calibration.

- Get a repetitive sequence of data trace transfers by date/time.

- Save S1P and S2P data files retreived from a supported network analyzer.


SPECIAL INSTALLATION NOTE:
---------------------------------
If you are running Office 97 (all Windows platforms):

You must have Office Service Release 2 installed (this means you must 
sequentially install SR-1 followed by SR-2).  The service pack can be 
obtained at the following URL:
http://officeupdate.microsoft.com/articles/sr2fact.htm 

You can verify you have the right version by clicking on the Help->About 
menu item in Excel.  The dialog box should say "Microsoft Excel 97 SR-2()". 
 
If you are running Win NT, you must be running NT 4.0 with a minimum 
of Service Pack 4.  The service pack can be obtained at the following URL: 
http://www.microsoft.com/ntserver/nts/downloads/recommended/SP6/allSP6.asp 
Installing a service pack update can cause National Instruments card
configuration to be removed.  You may have to reconfigure your NI GPIB card 
once the service pack installation is finished.

If you are running Windows 2000 and have an HP (now Agilent) 82350 GPIB card
you must obtain a version of the IO Libraries that is NEWER than version
H.01.02.  You can obtain updated software by going to the Agilent web site 
at www.agilent.com and searching for the term "io libraries".  Follow the
link to the download topic.  New software will be available in (approximately)
May 2000.



Complimentary Start-Up Assistance
---------------------------------
Agilent will provide Start-Up Assistance at no charge to resolve questions 
relating to the installation, operation, and use of this software product.  
Start-Up Assistance is available to help you install the software on your PC, 
establish communication with a compatible instrument, and answer questions 
relating to the functionality of the software components provided by Agilent.  
Start-Up Assistance does not support requests to modify or enhance the 
functionality of the software.  For services not covered by Start-Up Assistance, 
you may be referred to fee-based services for advanced assistance.

Agilent will make reasonable efforts to respond to each customer request for 
Start-Up Assistance within two working days, but is under no obligation to 
respond within a prescribed time frame.  Requests for Start-Up Assistance are 
handled in the order in which they were received.  Agilent will make 
reasonable efforts to solve customer problems, but cannot guarantee success.

Agilent reserves the right to terminate Start-Up Assistance at any time 
without notice. 



Agilent IntuiLink On-Line Help System
-----------------------------------
The help files are also available in Adobe(R) Acrobat(R) format (.PDF) 
in the \pdf_help directory on the Agilent IntuiLink CD-ROM.  
Install the Adobe Acrobat Reader program for viewing the .PDF files 
contained in the \pdf_help directory.



Troubleshooting Tips and Technical Support Information
------------------------------------------------------
For troubleshooting tips and technical support information, first refer to the 
Agilent IntuiLink VNA on-line help system or the FAQ.html file provided 
in the installation directory.

For further assistance, contact the Agilent BenchLink Technical Support 
personnel.  Local Agilent Technologies service representative can be found 
on the Agilent web site at www.agilent.com